Features
See allSurface preparation
Please ensure that surface to be coated is dry (moisture meter reading of <6%,vclean and free from all loose extraneous materials such as loose paint, dust, etc. If fungus or algae is present, treat with Berger Fungicidal Wash. Apply a suitable sealer coat such as Berger Plastaseal or Berger Water Based Sealer prior to application of this product. For repainting over old coatings, remove all loose or flaking coatings and take them back to a firm edge. Ensure the remaining coating is tightly adherent.
Application procedure
Stir contents of the can thoroughly before use. Thinning is not usually required, however, if desired, do not exceed thinning ratio mentioned in the product data sheet. Apply two coats of paint with adequeste time between coats.
Tools you can use
Available Packs
1 Coat
14 Sqm/L @ 30 microns**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Other systems
-
Paint Doctor
-
Colour Guides
-
Make Your Plan
Let us design a project plan
to suit your needs.