A water based road marking paint to draw parking bay lines, arrows, numbers, lines, etc. Berger Water Based Road Marking is suitable for use on bituminous and concrete surfaces. It is tough and abrasion resistant with very good weather durability. It is fast drying with low turn around time. It is lead and chrome free with low VOC thereby being environment friendly.
Features
See allFinishes -Matt
Surface preparation
- The surface to be over coated must be dry and free from debris before commencement of coating.
- Dry brushing should be done to remove dirt and dust. A fresh water wash is recommended.
- New concrete should be left for at least 21 days to cure before coating.
- The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
Application procedure
Stir contents of the can thoroughly before use. Thinning is not required.
Tools you can use
Available Packs
1 Coat
6.4 Sqm/L @ 75 Microns**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
-
Paint Doctor
-
Colour Guides
-
Make Your Plan
Let us design a project plan
to suit your needs.
CONNECT WITH US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.