Features
See allSurface preparation
- The surface to be over coated must be dry and free from debris before commencement of coating.
- Dry brushing should be done to remove dirt and dust. A fresh water wash is recommended.
- New concrete should be left for at least 21 days to cure before coating.
- The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
Application procedure
Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.
Tools you can use
Available Packs
1 Coat
5 Sqm/L @90 microns**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
we also recommend
Berger Water Based Road Marking
Berger Water Based Road Marking
A pure acrylic resin based road marking paint that is specially formulated with high quality weather durable pigments.
Quick Drying/Fast CuringResistant to Mild Chemicals & Oil
-
Paint Doctor
-
Colour Guides
-
Make Your Plan
Let us design a project plan
to suit your needs.