General
The Product Data Sheet of each finish is available along with the information for each product. They are also available here.
Berger paints offers a range of premium and value-for-money architectural paints, protective coatings for industrial use, and marine coatings. Details of all our products are available at colour spectra.
Please call us at +65 68017000 or email us at berger@bergeronline.Com.Sg and we will assist you with the most convenient way to purchase berger products depending on your need and location.
Try our Colour Visualizer (Link to be provided), which allows you to see how your room would look with different finishes. You can also use the Colour Visualizer for quick reference.
We are committed to creating the best and safest products. Berger finishes conform to standards of leading certifications PLS, Lyod’s Register, DNV – GL, etc. Apart from these, the Berger plant in Singapore is certified with ISO 9001, ISO 14001 and BizSafe Level 4.
Avoid wasting paint. Empty containers may also contain some residue of the paint, so they must be disposed off safely. Dispose off surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of the products, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and runoff, and contact with soil, waterways, drains and sewers.
Please upload your CV here. The HR department will get in touch with you if there is a relevant opening.
Use our Paint Services to figure out the amount of paint needed for your project. Area that can be covered by 1 litre of paint is called as coverage and the guide values for the same are provided for all products in the Colour Spectra. section.
Subscribe to our newsletter or follow us on Facebook, Twitter or Instagram to keep up with what’s happening at Berger Paints.
You could download the Berger Colour Scheme Pro App on your android device; and this will allow you to take a snapshot of the colour you like and match it to the nearest Berger Spectra colour. Alternatively, you can send us a small sample of colour you like (minimum size of 1 square inch) be it fabric, painted surface, tile, etc. or the colour coordinates (CMYK, Pantone, HSR or similar values) and we will try to provide you with the closest possible paint colour match.
Try to paint when temperatures are above 3 degree centigrade and relative humidity is less than 85%. For more details, refer to the technical data sheet of your selected product.
Colour is a phenomenon of light caused by how our eyes detect differing qualities of projected or reflected light. Hue defines pure colour. Tone is a visual property of colour. Tone is softer than the original colour as colour is mixed with white, greys and black.
Store your paints in cool dry conditions. Ensure there is adequate ventilation during application. Wear overalls, goggles, dust masks and gloves. Avoid all contact with skin and eyes. Refer to the Material Safety Data Sheet (MSDS) for further information.
A product data sheet (PDS) is available for every Berger product and clearly indicates how each product is to be applied to different surfaces. For any queries, you can contact us at +65 68017000 and request technical advice or a visit to your project site.
Monitors and printers may be calibrated differently leading to differences in colour. When in doubt, refer to a physical shade card from Berger Paints available at one of our outlets, or request a wall swatch.
For paint to adhere well, to perform over time and display all its characteristics, the substrate must first be prepared properly. Surface contamination will prevent paint from adhering on the substrate and its ability to prevent corrosion. Ensure that you follow the steps for surface preparation as outlined in the product data sheets to get the maximum performance from paint.