Luxatherm 6200

A single component, heat resisting paint formulated based on an air drying silicone-acrylic binder system.

Luxatherm 6200 is a heat resistant coating for use on steel subjected to temperatures of up to 220ºC. It is used in a wide range of industrial environments, e.g. petrochemical plants, power stations, offshore structures, etc. It has outstanding weathering resistance and durability. It also has good chemical resistance, and is easy to apply and maintain.


See all
Chemical ResistantHeat Resistant upto 220°C
Finishes -Gloss

Surface prepration

  • Remove wax, oil and grease from the surface by solvent cleaning in accordance to guidelines given by SSPC-SP1.
  • Dry brushing to remove soluble salts, dirt and dust.
  • Ensure that freshwater jetting is carried out to remove all loose contaminants and soluble salt deposition.
  • Remove scale by chipping, needle gun or spot blasting. Any loose or flaking aged coatings should be taken back to a firm edge.
  • Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP10. Prime the surface with Luxatherm 1600, Epilux 66 or Zincanode 300.
  • The surface preparation may be reduced to St 2, mechanical cleaning of the surface using hand or power tools. However, this will reduce the effective lifetime of the system.
  • Wherever necessary remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.
  • Galvanised and other non-ferrous surfaces should be primed with Luxaprime 1501.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
8 Sqm/L @ 50 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Luxatherm 1600
  • First Coat
    Luxatherm 6200
  • Second Coat
    Luxatherm 6200

Other systems

  • Base Coat
    Zincanode 330
  • First Coat
    Luxatherm 6200
  • Second Coat
    Luxatherm 6200
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!