Others in this category
  • Luxathane 5075

Autocare Enamel

A solvent based synthetic enamel specially formulated for refinishing all types of automobiles, industrial machinery and appliances.

Luxatherm 1600 is a heat resistant primer coating for use on steel substrates subjected to temperatures of up to 600ºC in a wide range of industrial environments, e.g. petrochemical plants, power stations, offshore structures etc. It is designed to be overcoated with Luxatherm 5200, Luxatherm 5600 or Luxatherm 6200 heat resistant finishes. It air dries to tack-free at room temperature and achieves fully cured state on subsequent baking. Has excellent adhesion to steel with outstanding anti-corrosive performance.


See all
Long Lasting GlossExcellent Flow and LevellingResistant to Mild Chemicals & Oil
Finishes -Gloss

Surface preparation

  • This product should be applied to an abrasive blast cleaned steel surface. If this is not carried out effectively, contaminants present on the steel surface can cause loss of adhesion of the coating system when the temperature is raised when the coating is brought into service.
  • Remove all wax, oil and grease by solvent cleaning in accordance to guidelines given by SSPC-SP1.
  • Where necessary remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.
  • Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP10.
  • Any surface defects revealed by blast cleaning should be ground, filled or treated in a suitable manner.
  • An average surface profile of 50 microns is acceptable but this average should not exceed 75 microns.
  • After blasting, remove dust from the surface.
  • The surface to be coated must be clean and dry.
  • Apply Luxatherm 1600 immediately after blasting to prevent oxidation and recontamination of the steel surface. In case of oxidation or recontamination, re-blast to the required standard.

Application procedure

Mix the pigment component slowly into the binder component while stirring using a mechanical stirrer/ agitator to ensure a homogenous mix, free from lumps.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
18 Sqm/L @ 25 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Autocare Primer
  • Second Coat
    Autocare Enamel

Other systems

  • Base Coat
    Autocare Primer
  • First Coat
    Luxacryl 1000
  • Second Coat
    Autocare Enamel
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!