Berger Apcofine 910

A high build super durable acrylic polysiloxane gloss finish.

Apcofine 910 is a high performance acrylic modified isocyanate free topcoat designed to provide duel benefits of corrosion protection and weatherability. It has excellent gloss, colour retention and corrosion resistance. It provides good Chemical resistance towards splash & spill.


See all
Long Lasting GlossCorrosion ResistantChemical Resistant
Finishes -Gloss

Surface preparation

• For optimum performance, this product should be applied to a surface that has been blast cleaned and suitably primed and built (e.g. with EPILUX 610 and EPILUX 58HS)
• This coating is usually applied over a suitable primer and undercoat or build-coat. This underlying system should be sound and undamaged.
• Ensure that the surface to be over-coated is clean, dry, and free from dust, grease and oil, or any other surface contaminants.
• Always ensure the maximum over-coating time for the primer or build-coat has not been exceeded prior to application.

• New concrete should be left for at least 21 days to cure before coating.
• The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
• The surface should be dry, free from surface contaminants, sound and undamaged.
• Apply one coat of suitable concrete primer/sealer such as Berger Plastaseal before applying BERGER APCOFINE 910.

Surface preparation

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
10 Sqm/L @ 75 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epilux 78
  • First Coat
    Epilux 58HS
  • Second Coat
    Berger Apcofine 910

Other systems

  • Base Coat
    Zincanode 685
  • First Coat
    Epilux 58HS
  • Second Coat
    Berger Apcofine 910
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!