Others in this category
  • Berger Apcofine 910

Berger Apcofine 905

A high build, high solid, weatherable epoxy polysiloxane coating.

Apcofine 905 is designed as a weatherable coating which offers properties both of high performance epoxy and polyurethane in single coat. It has excellent gloss and colour retention, provides resistance to corrosion and good chemical resistance towards splash and spill. It is recommended for direct application over Inorganic Zinc Coating.


See all
Long Lasting GlossCorrosion ResistantChemical Resistant
Finishes -Gloss

Surface preparation

• For optimum performance, this product should be applied to a surface that has been blast cleaned to SA 2 ½ of Swedish Standard and minimum surface profile of 50 microns. Suitably primed and built (e.g. with Zincanode 330 or EPILUX 610 and EPILUX 58HS)
• This coating is usually applied over a suitable primer and undercoat or build-coat. This underlying system should be sound and undamaged.
• Ensure that the surface to be over-coated is clean, dry, and free from dust, grease and oil, or any other surface contaminants.
• Always ensure the maximum over-coating time for the primer or build-coat has not been exceeded prior to application.

• New concrete should be left for at least 21 days to cure before coating.
• The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
• The surface should be dry, free from surface contaminants, sound and undamaged.
• Apply one coat of suitable primer/sealer such as Epimastic 3000HS applying BERGER APCOFINE 905.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
9 Sqm/L @ 100 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Zincanode 685
  • Second Coat
    Berger Apcofine 905

Other systems

  • Base Coat
    Zincanode 685
  • First Coat
    Epilux 58HS
  • Second Coat
    Berger Apcofine 905

we also recommend

  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!