Luxathane 5700

A highly durable aliphatic isocyanate cured polyurethane coating with excellent surface cleansability.

Luxathane 5700 is used as a topcoat over substrates of high aesthetic value that need protection against graffiti and dirt while at the same time providing a glossy attractive finished surface. It provides a smooth, hard surface that is easy to clean by conventional cleaning methods. It has excellent colour and gloss retention and overall durability properties.

Features

See all
Long Lasting GlossCorrosion ResistantChemical Resistant
Finishes -Gloss

Surface preparation

STEEL & CONCRETE
• This product should be applied to a surface that has been suitably primed and built. The surface preparation of the substrate shall conform to the requirements specified for the primer used.
• This coating is usually applied over a coloured polyurethane or epoxy topcoat. The underlying system should be sound and undamaged.
• Ensure that the surface to be over-coated is clean, dry, and free from dust, grease and oil, or any other surface contaminants.
• Always ensure the maximum over-coating time for the primer or build-coat has not been exceeded prior to application.

ALUMINIUM, GALVANISED STEEL
• Degrease with SOLVALUX 7-45 and where practical abrade lightly to increase anchoring sites and improve adhesion. Pre-treat with one coat of LUXAPRIME 1501 followed by 1-2 coats of a suitable build coat, e.g. EPILUX 218.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Conventional Spray

May require additional dilution to achieve good atomisation.

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L

1 Coat
9 Sqm/L @50 microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epimastic 3000HS
  • First Coat
    Luxathane 5075
  • Second Coat
    Luxathane 5700

Other systems

  • Base Coat
    Epilux 78
  • First Coat
    Luxathane 5075
  • Second Coat
    Luxathane 5700
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!