Others in this category
  • Berger Apcofine 910

Luxathane 5150HS

A high build, isocyanate free modified acrylic coating designed as an environment friendly substitute for conventional iscocyanate cured acrylic polyurethanes.

Luxathane 5150HS is a high performance finishing coat for steel in a variety of environments including aggressive and corrosive environments such as onshore and offshore steel superstructures, pipelines, bridges etc. Easy maintenance coating with long term recoatability properties. It has excellent colour and gloss retention and overall durability properties with excellent flow and levelling properties. It is resistant to spillage or splashes of mild chemicals.

Features

See all
Long Lasting GlossCorrosion ResistantChemical Resistant
Finishes -Gloss

Surface preparation

STEEL
• For optimum performance, this product should be applied to a surface that has been blast cleaned and suitably primed and built (e.g. with EPILUX 610 and EPILUX 58HS).
• This coating is usually applied over a suitable primer and undercoat or build-coat. This underlying system should be sound and undamaged.
• Ensure that the surface to be over-coated is clean, dry, free from dust, grease and oil, or any other surface contaminants.
• Always ensure that the maximum over-coating time for primer or build-coat has not been exceeded prior to application.

ALUMINIUM, GALVANISED STEEL
• Degrease with SOLVALUX 7-45 and abrade lightly wherever practical to increase anchoring sites and improve adhesion. Pre-treat with one coat of LUXAPRIME 1501 followed by one coat of a suitable build coat e.g. EPILUX 218.

Application procedure

Stir the contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L

1 Coat
13 Sqm/L @ 50 microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

we also recommend

  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!