Others in this category
  • Luxathane 5075

Luxathane 5060

A aliphatic isocyanate cured polyurethane coating with durable finish, used for infrastructure projects.

Luxathane 5060 is a high performance finishing coat for structural steel in infrastructure projects. It is suitable as a finishing coat for concrete and plastered surfaces in areas where high durability is required. Excellent colour and gloss retention and overall durability properties with long term re-coatability properties. Suitable for use over a wide range of substrates e.g. steel, concrete, wood, gypsum etc.


See all
Long Lasting GlossCorrosion ResistantHeat Resistance upto 150°C
Finishes -Gloss

Surface preparation

• For optimum performance, this product should be applied to a surface that has been blast cleaned, and suitably primed and built.
• This coating is usually applied over a suitable primer and undercoat or build-coat. This underlying system should be sound and undamaged.
• Ensure that the surface to be over-coated is clean, dry, and free from dust, grease, oil, or any other surface contaminants.
• Always ensure that the maximum over-coating time for primer or build-coat has not been exceeded prior to application.

Aluminium, Galvanized steel
• Degrease with Solvalux 7-45 and abrade lightly wherever practical to increase anchoring sites and improve adhesion. Pre-treat with one coat of Luxaprime 1500, followed by one coat of a suitable build coat, e.g. Epilux 218.

Application procedure

Stir the contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
12 Sqm/L @ 40 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epilux 610
  • First Coat
    Epilux 218
  • Second Coat
    Luxathane 5060

Other systems

  • Base Coat
    Epimastic 3100
  • Second Coat
    Luxathane 5060
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!