Luxol 3100

A single component, modified alkyd undercoat pigmented with micaceous iron oxide.

Luxol 3100 is an anti-corrosive buildcoat or maintenance coating for use in conventional alkyd systems. It has excellent barrier and anti-corrosive properties. With high resistance to moisture and dry heat temperatures of upto 120ºC, it is suitable for both exterior and interior use on wood and metal substrates.


See all
Corrosion ResistantExcellent barrier protection Heat Resistance upto 100°C
Finishes -Matt

Surface preparation


  • This product must be applied over a suitable alkyd anti-corrosive primer coating, e.g. Luxaprime 1400.
  • Ensure that the underlying system is intact, sound and undamaged.
  • Any loose or flaking coatings should be taken back to a firm edge.
  • Ensure that the surface to be over-coated is clean, dry, free from dust, grease and oil, or any other surface contaminants.
  • Remove all wax, oil and grease by solvent cleaning in accordance to guidelines given by SSPC-SP1.
  • Dry brush to remove all soluble salts, dirt and dust.
  • Always ensure that the maximum over-coating time for the primer/build coat is not been exceeded prior to application.


  • Apply one coat of Berger Aluminium Wood Primer prior to applying Luxol 3100.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
14.5 Sqm/L @ 40 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Luxaprime 1300
  • First Coat
    Luxol 3100
  • Second Coat
    Luxol 5000

Other systems

  • Base Coat
    Luxaprime 1400
  • First Coat
    Luxol 3100
  • Second Coat
    Luxol 5000
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!