Autocare Primer is designed as a primer coat on steel substrates for refinishing cars, vans, trucks, buses, tractors and other heavy equipment. With excellent adhesion and anti-corrosive properties, it is resistant to spillage of petroleum and diesel fuels. Also, it is part of the Autocare system as basecoat for Autocare Enamel.
Features
See allFinishes -Matt
Surface preparation
- The steel surface coated should be dry, sound and undamaged. It must be free of surface contaminants such as grease, oil, dust, salts and rust.
- Soluble salts must be removed by washing with fresh water. Dry brushing should be done to remove dirt and dust. If oil or grease is present, clean using mild detergent or solvent and rinse thoroughly.
- It there is evidence of rusting, the affected areas should be thoroughly sanded down with sandpaper or mechanical tools.
Application procedure
Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.
Tools you can use
Available Packs
1 Coat
11.4 Sqm/L @35 microns**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Other systems
we also recommend
-
Paint Doctor
-
Colour Guides
-
Make Your Plan
Let us design a project plan
to suit your needs.
CONNECT WITH US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.