Others in this category
  • Epimastic 3100

Luxaprime 1400

A single component high build multi-purpose alkyd primer formulated with high performance modified zinc phosphate anti-corrosive pigmentation for use on steel substrates.

Luxaprime 1400 is an ideal primer for post-fabrication in new construction projects for either conventional, chlorinated rubber or polyurethane systems. Suitable for interior or exterior use in moderately aggressive environments. It has excellent anti-corrosive properties that outperform conventional zinc phosphate based primers. It can be applied to non-blast cleaned surfaces and is suitable for use in applications where dry heat resistance up to 100ºC is required. Recommended as a rapid re-coatable primer when quick handling times are critical.

Features

See all
Suitable for Interiors and ExteriorsExcellent Intercoat AdhesionCorrosion Resistant
Finishes -Matt

Surface preparation

  • Remove all wax, oil and grease by solvent cleaning in accordance to guidelines given by SSPC-SP1.
  • Dry brush to remove soluble salts, dirt and dust.
  • Freshwater jetting is required to remove all loose contaminants and soluble salt deposition.
  • Remove scale by chipping, needle gun or spot blasting. Any loose or flaking coatings should be taken back to a firm edge.
  • Mechanically clean the surface using hand or power tools to a minimum standard of St 2 (ISO 8501-1:1988) or SSPC-SP2 taking care to avoid polishing the surface. For optimum performance an abrasive blast to Sa 2 or SSPC SP-6 (commercial blast) is recommended with an average surface profile of 30 to 50 microns.
  • Where necessary remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L

1 Coat
9.4 Sqm/L @ 50 microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Luxaprime 1400
  • First Coat
    Luxol 1000
  • Second Coat
    Luxol 5000

Other systems

  • Base Coat
    Luxaprime 1400
  • First Coat
    Luxol 3100
  • Second Coat
    Luxol 5000
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!