Others in this category
  • Luxaprime 1501

Galvaprime

A two component, etching / wash primer based on a polyvinyl butyral resin, phosphoric acid and zinc chromate anti corrosive pigmentation.

An acidic pre-treatment etching primer for use on galvanised iron, aluminium, zinc, copper and other non-ferrous substrates to promote and enhance adhesion of subsequent coatings. It is very fast in drying and can be overcoated with a variety of single pack and two pack products. It has excellent intercoat adhesion and an extended over coating interval of upto 3 months

Features

Excellent Intercoat Adhesion
Finishes -Matt

Surface preparation

Ensure all surface contaminants such as wax, grease, oil, white zinc salts etc. are removed by suitable methods. Wet abrasion using Solvalux 5-30 and abrasive paper will improve adhesion to non-ferrous metal substrates.

Application procedure

Recommended to be applied using a conventional air spray. Can be applied using a brush or roller if care is taken not to exceed recommended film thickness and to ensure that an even film is applied.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Spray

Roller

May be used for difficult shapes or touch up purposes

Available Packs


4Kg/  5L

1 Coat
16 Sqm/L @ 10 Microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Other systems

  • Base Coat
    Galvaprime
  • Second Coat
    Berger Epifloor
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!