Berger Duracast Pebbletex
A versatile, exterior textured finish that gives a multitude of designs and patterns. It also bridges cracks and resists UV and microbial growth.
Please ensure that surface to be coated is dry (moisture meter reading of <6%), clean and free from all loose extraneous materials such as loose paint, dust etc. If fungus or algae is present, treat with Berger Fungicidal Wash. For repainting over old coatings, remove all loose or flaking coatings and take them back to a firm edge. Ensure the remaining coating is tightly adherent.
Stir contents of the can thoroughly before use. Thinning is not usually required, however, if desired, do not exceed the thinning ratio mentioned in the product data sheet.
Tools you can use
May require additional dilution to achieve good atomisation.
1 - 2 Kg/Sqm (depends on texture size and density)**
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Low Paint Odour & VOC
Environment friendly paint with very low paint odour and VOC during and after application.
Suitable for Interiors and Exteriors
Weather resistant and hence suitable for both interior and exterior use.
Excellent Intercoat Adhesion
Adheres strongly to both the substrate and the top coat thereby providing a durable protection against corrosion.
Water Vapour Permeable
Allows water vapour present in the substrate to escape thereby allowing the substrate to breathe.
Variety of Finishes
Able to achieve a variety of fine to coarse textured finishes.
Make Your Plan
Let us design a project plan
to suit your needs.