Others in this category
  • Berger Apcofine 910

Luxathane 5075

A high build, aliphatic isocyanate cured acrylic polyurethane high durable finish.

Luxathane 5075 is high performance finishing coat for structural steel in aggressive and corrosive environments such as onshore and offshore steel superstructures, pipelines and bridges etc. Also suitable as a finishing coat for concrete surfaces where high durability is desired. Easy maintenance coating with long term recoatability properties and provides excellent colour and gloss retention. Excellent flow and levelling properties and resistant to spillage or splashes of mild chemicals. It also come with excellent UV resistance and overall durability properties Able to achieve a film build of 75μm in a single coat application.


See all
Long Lasting GlossCorrosion ResistantUV Resistant
Finishes -MattSemi GlossGloss

Surface preparation


  • For optimum performance, this product should be applied to a surface that has been blast cleaned and suitably primed and built (e.g. with EPILUX 610 and Epilux 58HS).
  • For recoating application, the underlying system should be sound and undamaged.
  • Ensure that the surface to be over-coated is clean, dry, and free from dust, grease, oil, or any other surface contaminants.
  • Always ensure that the maximum over-coating time for primer or build-coat has not been exceeded prior to application.

Aluminum, Galvanised steel

  • Degrease with SOLVALUX 7-45 and abrade lightly wherever practical to increase anchoring sites and improve adhesion. Apply one coat of Etch Primer followed by one coat of a suitable build coat.


  • New concrete should be left for at least 21 days to cure before coating.
  • The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
  • The surface should be dry, free from surface contaminants, sound and undamaged.
  • Apply one coat of suitable concrete primer/sealer such as Berger Plastaseal or Epimastic 3000HS before applying Luxathane 5075.

Application procedure

Stir the contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


Popular system

  • Base Coat
    Zincanode 668
  • First Coat
    Epilux 58
  • Second Coat
    Luxathane 5075

Other systems

  • Base Coat
    Epilux 78
  • First Coat
    Epilux 58HS
  • Second Coat
    Luxathane 5075

we also recommend

  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!