Others in this category
  • Luxathane 5075

Luxathane 5000HB

A high build aliphatic isocyanate cured acrylic polyurethane finish.

Epilux 18HS is an anti-corrosive protective coating, ideal for marine vessels and total, partial or intermittent submerged structures, such as pilings, pontoons, jetties, dock gates, etc. It has outstanding anti-corrosive performance with excellent fresh and seawater resistance. It is compatible with cathodic protection and offers good abrasion resistance.


See all
Long Lasting GlossCorrosion ResistantHeat Resistance upto 150°C
Finishes -Semi Gloss

Surface preparation


  • This product should be applied to a surface that has been blast cleaned. It can be applied either directly to steel or to a suitably primed surface (e.g. with Epilux 610 or Zinconade 685).
  • Remove all wax, oil and grease in accordance with the guidelines given by SSPC-SP1.
  • Where necessary, remove weld spatter and round off all rough weld seams and sharp edges to create a smooth surface.
  • Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP10.
  • Any surface defects revealed by blast cleaning should be rectified in a suitable manner.
  • An average surface profile of 50 - 75 microns is acceptable.
  • Apply Epilux 18HS immediately after blasting to prevent oxidation and recontamination of the steel surface. In case of oxidation or recontamination, re-blast to the required standard.


  • Ensure that the surface is sound. Remove laitence by thorough wire-brushing, acid etching or sweep blasting. Blowholes and other defects should be filled with Solventless Epoxy Filler. The first coat must be thinned by 20% for direct application to concrete.

Application procedure

Stir the contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
12.40 Sqm/L @ 50 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epimastic 7100
  • First Coat
    Luxathane 5000HB
  • Second Coat
    Luxathane 5000HB

Other systems

  • Base Coat
    Epimastic 3000HS
  • Second Coat
    Luxathane 5000HB
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!