Luxol 6600

A single component, alkyd coating pigmented with aluminium pigment to provide an attractive metal finish.

Luxol 6600 is a high gloss finish coat for use in conventional alkyd coating systems. It is suitable for both new construction and as a maintenance coating for use on steel, wood, aged coatings, etc. It has good weathering and heat reflective properties and overall durability. It also offers good opacity hiding power. It is an easy application and easy maintenance coating suitable for both interior and exterior exposure.


See all
Suitable for Interiors and ExteriorsHeat Reflective
Finishes -Metallic

Surface preparation


  • Luxol 6600 should be applied to a surface that has been suitably primed and built.
  • The underlying system should be intact, sound and undamaged.
  • Any loose or flaking coatings should be taken back to a firm edge.
  • Ensure that the surface to be over-coated is clean, dry, free from dust, grease and oil, or any other surface contaminants.
  • Remove all wax, oil and grease by solvent cleaning in accordance to guidelines given by SSPC-SP1.
  • Dry brushing to remove soluble salts, dirt and dust.
  • A fresh water wash must follow to remove all soluble salts.
  • Always ensure that the maximum over-coating time for the primer/build coat is not been exceeded prior to application.


  • Apply one coat of Berger Aluminium Wood Primer followed by one coat of Luxol 1000. Then apply Luxol 6600.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
8.3 Sqm/L @ 30 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Luxaprime 1000
  • First Coat
    Luxol 6600
  • Second Coat
    Luxol 6600

Other systems

  • Base Coat
    Luxaprime 1000
  • First Coat
    Luxol 1000
  • Second Coat
    Luxol 6600
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!