A two-component epoxy luminous coating specially formulated to provide an attractive glow in dark finish.

Glocote is a semi gloss finish coat designed to make any surface glow in the dark. This product can be applied to wood, metal, drywall, and many other surfaces. It is ideal for use on walls, doors, drawer fronts, storage containers, light switches, pipe lines, etc. to highlight areas of caution at night. It can glow up to 4 hours after a full charge.
Finishes -Semi Gloss

Surface preparation


• Glocote 3L should be applied on suitably primed substrate.

• This coating is recommended to apply over white primer or undercoat.

• Ensure that the surface to be over-coated is clean, dry, free from dust, grease and oil, or any other surface contaminants.

• A fresh water wash must follow to remove all soluble salts.

• Always ensure that the maximum over-coating time for the primer/build coat is not been exceeded prior to application.

Aluminium, galvanised steel

• Degrease and abrade with Solvalux 7-45 and wet-or-dry paper. Apply Luxaprime 1501. If the primer shows signs of breakdown, then a full sweep blast may be required prior to coating.

• Apply Glocote 3L as soon as possible after surface preparation to prevent recontamination. To avoid condensation of moisture onto substrate prior to coating application, relative humidity should not exceed 85% and substrate temperature should be more than 3 °C above Dew Point.


• The concrete surface to be coated should be sound, dry and free from all foreign matter such as dirt, dust, oil and grease.

 Application procedure

The hardener component of this product must be mixed thoroughly with the base component and allowed to pre-react (induct) for a period of 15 minutes before proceeding to application. Without pre-reaction, this product may result in a greasy/tacky surface, incomplete cure and/or discolouration.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
8 Sqm/L @ 50 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epimastic 3000HS
  • First Coat
  • Second Coat
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!