Others in this category
  • Luxaprime 1400

Luxaprime 1300

A single component, anti-corrosive primer based on a modified alkyd resin system and Zinc Chromate anti-corrosive pigmentation.

Luxaprime 1300 is a Zinc Chromate based anti-corrosive primer or maintenance coating for use in conventional alkyd coating systems. It has excellent adhesion to steel and aged coatings and can be applied to non-blast cleaned (i.e. hand tool or power tool cleaned) surfaces. It is suitable for both interior and exterior exposure. It can withstand dry heat of up to 90°C and can be used in marine environment.


See all
Suitable for Interiors and ExteriorsExcellent Intercoat AdhesionCorrosion Resistant
Finishes -Matt

Surface preparation

  • Remove all wax, oil and grease by solvent cleaning in accordance to guidelines given by SSPC-SP1.
  • Dry brushing to remove soluble salts, dirt and dust.
  • Freshwater jetting is required to remove all loose contaminants and soluble salt deposition.
  • Remove scale by chipping, needle gun or spot blasting. Any loose or flaking coatings should be taken back to a firm edge.
  • Mechanically clean the surface using hand or power tools to a minimum standard of St 2 (ISO 8501-1:1988) or SSPC-SP2 taking care to avoid polishing the surface. For optimum performance an abrasive blast to Sa 2 or SSPC SP-6 (commercial blast) is recommended with an average surface profile of 30 to 50 microns.
  • Where necessary remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
12Sqm/L @50 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Luxaprime 1300
  • First Coat
    Luxol 1000
  • Second Coat
    Luxol 5000

Other systems

  • Base Coat
    Luxaprime 1300
  • First Coat
    Luxol 3100
  • Second Coat
    Luxol 5000
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!