Others in this category
  • Epimastic 3000HS

Epimastic 5100

A high build, self-priming surface tolerant epoxy coating pigmented with aluminium flakes.

Berger Epimastic 5100 provides rapid curing, tough anti-corrosive maintenance primer for steel where blasting is impractical and only power or hand tool surface preparation is possible. It has excellent wetting and adhesion to a variety of substrates and aged coatings with outstanding anti-corrosive performance on both blasted and non-blasted steel. It is able to withstands continuous dry heat up to 150ºC and can be used for corrosion protection under thermal insulation of carbon steel and stainless steel. Ideal for use with wet abrasive blasting or ultra high pressure water blasting.


See all
Corrosion ResistantHeat Resistance upto 150°C
Finishes -Semi Gloss

Surface preparation

• Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1.
• Soluble salts, dirt and dust must be removed prior to coating. A freshwater wash must follow to remove all soluble salts.
• Remove scales by chipping, needle gun or spot blasting.
• All loose or flaking coatings should be removed back to a firm edge.
• Mechanically clean the surface using hand or power tools to a minimum standard of St 2 (ISO 8501-1:1988) or SSPC-SP2 taking care to avoid polishing the surface.
• Where necessaries remove weld spatter and round off all rough weld seams and sharp edges to smooth surface.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
8.00 Sqm/L @ 100 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epimastic 5100
  • First Coat
    Epimastic 5100
  • Second Coat
    Luxathane 5075

Other systems

  • Base Coat
    Epimastic 5100
  • First Coat
    Epimastic 3000HS
  • Second Coat
    Luxathane 5075
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!