Others in this category
  • Luxathane 5075

Epilux 4

A epoxy coating that is specially formulated to provide an attractive and durable glossy finish.

Epilux 4 is a durable finish coat for epoxy based coating systems. It is tough, hard wearing finish with overall durability properties and has high resistance to impact and abrasion. It has excellent adhesion to aged epoxy coatings. It is available in glossy/ semi-glossy and matt finishes. Epilux 4 can be used on cured concrete as a primer and are good resistance to spillage or splashes of mild chemicals and are able to withstand dry heat of up to 100°C continuous and 120°C intermittent.

Features

See all
Abrasion ResistantResistant to Mild Chemicals & OilHeat Resistance upto 100°C
Finishes -MattSemi GlossGloss

Surface preparation

Steel
• Epilux 4 should be applied over a suitable primer or build coat. For recoating, the underlying system should be intact, sound and undamaged.
• Ensure that the surface to be over-coated is clean, dry, free from dust, grease and oil, or any other surface contaminants.
• A fresh water wash must follow to remove all soluble salts.
• Always ensure that the maximum over-coating time for the primer/build coat is not been exceeded prior to application.

Aluminium, Galvanized steel
• Abrade using wet-or-dry paper and degrease with Solvalux 7-45. Apply Luxaprime 1501. If the primer shows signs of breakdown, then a full sweep blast may be required prior to coating.
• Apply Epilux 4 immediately after surface preparation to prevent recontamination.

Concrete
• The concrete surface to be coated, should be sound, dry and free from contaminants such as dirt, dust, oil and grease.

Application procedure

The hardener component of this product must be mixed thoroughly with the base component and allowed to pre-react (induct) for a period of 15 minutes before proceeding to application. Without pre-reaction, this product may result in a greasy/tacky surface, incomplete cure and/or discolouration.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L

1 Coat
10 Sqm/L @ 50 microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epilux 610
  • First Coat
    Epilux 4
  • Second Coat
    Epilux 4

Other systems

  • Base Coat
    Epilux 78
  • First Coat
    Epilux 58
  • Second Coat
    Epilux 4
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!