Others in this category
  • Epilux 218

Epilux 58HS

A high solids polyamide epoxy intermediate coating, available in both conventional pigmentation (MIO free) and with micaceous iron oxide (MIO).

Epilux 58HS is designed for barrier protection, particularly in industrial and offshore settings. This polyamide-cured epoxy is fortified with micaceous iron oxide, a compound that is one of the highest performing barrier pigments. It offers excellent resistance to abrasion, chemicals and moisture. Epilux 58HS is the perfect protective coating, especially when paired with the right system.

Features

See all
Abrasion ResistantCorrosion ResistantExcellent barrier protection
Finishes -Low Sheen

Surface preparation

• Epilux 58HS should be applied to a surface that has been blast cleaned and suitably primed.
• The underlying system should be intact, sound and undamaged. The primer should be either 2 pack epoxies, polyurethane or zinc silicates.
• Ensure that the surface to be overcoated is clean, dry, and free from dust, grease and oil, or any other surface contaminants.
• A fresh water wash must follow to remove all soluble salts.
• Always ensure that the maximum overcoating time for the primer/build coat is not been exceeded prior to application.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L/  20L

1 Coat
8.00 Sqm/L @ 100 microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Zincanode 330
  • First Coat
    Epilux 58HS
  • Second Coat
    Luxathane 5075

Other systems

  • Base Coat
    Zincanode 668
  • First Coat
    Epilux 58HS
  • Second Coat
    Luxathane 5150HS
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!