Berger Water Based Enamel

A pure acrylic enamel formulated with weather resistant pigments and reinforced with antimicrobial agents that provides lasting high gloss finish.

Berger Water Based Enamel is a water based acrylic enamel with excellent gloss and durability. It has good colour retention properties and excellent adhesion on ferrous & non ferrous surfaces, wood and aged coatings. It has high opacity and covering capacity. Free from Lead and other heavy metals, it offers a Low VOC alternate to solvent based enamel paint (VOC 35 gms/Ltr).

Features

See all
Long Lasting GlossLow VOCExcellent Opacity and Coverage
Finishes -Gloss

Surface preparation

 

  • This coating is designed to be applied over an alkyd primer/undercoat e.g. Luxaprime 1250 or Berger Undercoat as well as on all water based primers and sealers.
  • The surface to be coated must be clean and free from all loose extraneous materials such as loose paint, dust, etc.
  • For new concrete, cure it for 21 days before application of coating. The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
  • Soluble salts on the surface must be removed by washing with fresh water. Dry brushing needs to be done to remove dirt and dust. If grease is present, use a mild detergent or solvent and rinse thoroughly to ensure complete removal of the grease, detergent and solvent.
  • All loose flaking coatings should be removed and taken back to a firm edge.
  • Berger Aluminium Wood Primer should be used to prime wooden substrates. A build coat of Berger Undercoat is recommended prior to application of this product.
  • For over coating over old coatings, high pressure water cleaning should be performed to remove all loose or flaking coatings and ensure the remaining coatings are tightly adherent.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L

1 Coat
12.3Sqm/L @30 Microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Second Coat
    Berger Road Marking
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!