Others in this category
  • Zincanode 696

Zincanode 310

A metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and for high performance coating system.

Zincanode 310 is zinc based high performance metallic anti-corrosive coating specially developed for touch up on hot dip galvanized substrates or inorganic zinc coatings. It provides good anti-corrosive performance. It provides continuous dry heat resistance up to 150ºC and intermittent temp up to 250°C maximum. It is fast curing with rapid handling features, and is also available in aerosol cans.


See all
Corrosion ResistantQuick Drying/Fast CuringHeat Resistance upto 150°C
Finishes -Metallic

Surface preparation


  • Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1.
  • Where necessary remove weld spatter, round off all rough weld seams and smoothen sharp edges.
  • For substrates with rust scale, power tool clean to SSPC-SP3 or SSPC-SP11.
  • Abrasive blast clean to a minimum standard of minimum Sa 2 SSPC-SP6, if the surface has mill-scales, heavy rusting or was previously painted.
  • Ensure that all surface defects detected after blast cleaning is ground, filled or treated in a suitable manner.
  • After blasting, remove dust from the surface. Ensure that the surface to be coated is clean, dry and free from any contaminants.

Hot Dip Galvanized Substrate
Clean the substrate using solvent as per SSPC-SP1. Power tool clean to SSPC-SP3 or SSPCSP11, in case of rust scales. Apply 1–2 coats of Zincanode 310 as per the requirement.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
8.00 Sqm/L @ 30 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Zincanode 310
  • Second Coat
    Epilux 218

Other systems

  • Base Coat
    Zincanode 310
  • First Coat
    Epilux 218
  • Second Coat
    Epilux 4
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!