Epiluxaqua 10

A two-pack, waterborne epoxy primer/intermediate coat which cures down to 5ºC. It contains active corrosion protective pigments & flash rust inhibiting material.

Epiluxaqua 10 is a general-purpose protective coating system for steel structures in atmospheric exposure with outstanding anti-corrosive performance and good adhesion to steel substrates. It is particularly suitable when solvents are not permitted because of health and safety reasons. It can be over coated with two component and conventional paints.


See all
Excellent Intercoat AdhesionCorrosion Resistant
Finishes -Matt

Surface preparation

  • Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1. Where necessary removes weld spatter and round off all rough weld seams and sharp edges to a smooth surface.
  • Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP10 with an average surface profile of 50 to 75 microns.
  • Ensure that all surface defects detected after blast cleaning is ground, filled or treated in a suitable manner.
  • After blasting, remove dust from the surface. Ensure that the surface to be coated is clean, dry and free from any contaminants.
  • Good ventilation is required in the confined areas to ensure proper drying.
  • The coating should not be exposed to oil, chemical or mechanical stress until fully cured.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
8.00 Sqm/L @ 75 microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epiluxaqua 10
  • Second Coat
    Epiluxaqua 50
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!