Epilux 816SF

A two component, solvent free chemically resistance epoxy phenolic tank lining product.

Epilux 816SF is an internal tank lining suitable for use with a wide range of chemicals. It provides corrosion protection of internal steel storage tanks. It has excellent chemical resistance to chemicals such as crude oil, gasoline blend, aromatic and aliphatic solvents. It also has outstanding adhesion to blasted steel and good anti-corrosive performance properties.

Features

See all
Corrosion ResistantChemical Resistant
Finishes -Semi Gloss

Surface preparation

 

  • Epilux 816 should be applied to a surface that has been blast cleaned. It may be applied directly to blast cleaned steel or over a suitable primer e.g. Epilux 610.
  • Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1. Where necessary, remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.
  • Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP10. An average surface profile of 75 – 100 microns is required.
  • Ensure that all surface defects detected after blast cleaning is ground, filled or treated in a suitable manner.
  • After blasting, remove dust from the surface. Ensure that the surface to be coated is clean, dry and free from any contaminants.
  • Apply Epilux 816 immediately after blasting to prevent oxidation and recontamination of the steel surface. The use of a dehumidification system and/ or the use of a suitable blast/ holding primer such as Epilux 610, is recommended to prevent oxidation of the blasted steel surface. In case of oxidation/recontamination, re-blast to the required standard.

Appication procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Airless Spray

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L

1 Coat
9.9 Sqm/L @ 100 Microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epilux 610
  • Second Coat
    Epilux 816SF

Other systems

  • Base Coat
    Epilux 816SF
  • Second Coat
    Epilux 816SF
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!