Others in this category
  • Epilux 155SF

Epilux 155

It is a solvent based high build chemically resistant, amine-adduct cured epoxy coating used as internal tank lining.

Epilux 155 is an internal tank lining suitable for use with a wide range of chemicals. It can be used as a non-toxic chemical resistant finish coat in the food and chemical industries and is suitable for use in contact with portable water. Epilux 155 is recommended for use as an anti-corrosive build coat for structural steel in mild to aggressive environments. It is also suitable for application on concrete for chemical resistant floorings. It complies with the requirements of BS6920.

Features

See all
Corrosion ResistantChemical ResistantNon Toxic Finish
Finishes -Semi Gloss

Surface preparation

  • Epilux 155 should be applied to a surface that has been blast cleaned and suitably primed (e.g. with EPILUX 610 or EPILUX 66).
  • The underlying system should be intact, sound and undamaged. The primer should be either 2 pack epoxies, polyurethane or zinc silicates.
  • Ensure that the surface to be over-coated is clean, dry, free from dust, grease and oil, or any other surface contaminants.
  • A fresh water wash must follow to remove all soluble salts.
  • Always ensure that the maximum over-coating time for the primer / build coat is not been exceeded prior to application.

 Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.

Roller

May be used for difficult shapes or touch up purposes

Available Packs


5L/  20L

1 Coat
4.5 Sqm/L @ 125 Microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epilux 610
  • First Coat
    Epilux 155
  • Second Coat
    Epilux 155

Other systems

  • Base Coat
    Epilux 155
  • Second Coat
    Epilux 155
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!