Epilux 86

A two component, high build, exothermically cured modified epoxy coating for excellent anticorrosion & barrier performance.

Epilux 86 is a tough anti-corrosive coating for splash/ tidal zones, pipelines, bridge/ jetty pilings, other off shore steel structures, etc. It is an excellent barrier coating with anti-corrosive performance, very good abrasion resistance and scratch hardness. It can achieve up to 750 microns dry film thickness in a single coat application.


See all
Abrasion ResistantCorrosion ResistantExcellent barrier protection
Finishes -Semi Gloss

Surface preparation

  • This product should be applied to a surface that has been blast cleaned. It can be applied either directly to steel or suitably primed surface (e.g. Epilux 610 or Zincanode 685).
  • Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1.
  • Wherever necessary remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.
  • Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP6.
  • Any surface defects revealed by blast cleaning should be ground, filled or treated in a suitable manner.
  • An average surface profile of 100 microns is acceptable but this average should not exceed 125 microns.
  • After blasting, remove dust from the surface.
  • The surface to be coated must be clean and dry.
  • Apply Epilux 86 or suitable primer immediately after blasting to prevent oxidation and recontamination of the steel surface. In case of oxidation or recontamination, re-blast to the required standard.

 Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray

Conventional Spray

May require additional dilution to achieve good atomisation.


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
4 Sqm/L @ 200 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Zincanode 668
  • First Coat
    Epilux 86
  • Second Coat
    Epilux 86

Other systems

  • Base Coat
    Epilux 86
  • First Coat
    Epilux 86
  • Second Coat
    Luxathane 5075
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!