Others in this category
  • Steelshield 1100

Steelshield 1200

A high performance two-component, high solids, glass flake reinforced epoxy coating.

A high performance coating with strength and toughness for the most demanding of applications, such as splash and tidal zones, offshore steel superstructures, bridges, decks, etc. It is suitable as a single coat maintenance system for onshore and offshore installations. It is able to cure underwater and at temperatures down to 5ºC. It has outstanding barrier & anti-corrosive performance and excellent chemical, abrasion & impact resistance. It is compatible with sacrificial anode and impressed current systems and is resistant to cathodic disbondment.


See all
Abrasion ResistantCorrosion ResistantChemical Resistant
Finishes -Semi Gloss

Surface preparation

• Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1. Where necessaries remove weld spatter and round off all rough weld seams and sharp edges to a smooth surface.

• Abrasive blast clean to a minimum standard of Sa2½ (ISO 8501-1:1988) or SSPC-SP10 (Blast to Sa 3 or SSPC-SP5 for optimum performance). A surface profile of 75 to 100 microns is required for direct to steel application. For primed applications, please follow profile recommendations given for the primer.

• Any surface defects that is revealed by blast cleaning should be ground, filled or treated in a suitable manner. After blasting, remove dust from the surface. The surface that is to be coated must also be clean and dry.

• Apply Steelshield 1200 immediately after blasting to avoid oxidation and recontamination of the steel surface. In case of oxidation or recontamination, re-blast to the required standard.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required. However, if thinning is desired, do not exceed the recommended thinning ratio.

Tools you can use


May be used for difficult shapes or touch up purposes

Airless Spray


May be used for difficult shapes or touch up purposes

Available Packs


1 Coat
2.25 Sqm/L @ 400 Microns**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Epilux 610
  • First Coat
    Steelshield 1200
  • Second Coat
    Steelshield 1200

Other systems

  • Base Coat
    Epilux 610
  • First Coat
    Epilux 155
  • Second Coat
    Epilux 155
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!