Others in this category
  • Weathercoat Maxcool

Weathercoat Silicone Emulsion

An exterior finish with high elastomeric properties that enables it to bridge surface cracks and prevent moisutre from entering the surface.

A silicone resin-modified acrylic emulsion paint specifically developed for the needs of the demanding Asian markets. The product is designed to repel rainwater and contaminants, while allowing water vapour to permeate, thus minimising surface defects leaving the building clean and fresh. By restricting the absorption of moisture, the high-resistance paint inhibits the growth of algae and fungi, resulting in a long-lasting attractive appearance of the facade. Berger Silicon Emulsion is not only durable, it can also be easily applied and it dries in a low-stress way. This high quality coating guarantees excellent application results.

Features

See all
6 Years Performance WarrantyExcellent Dirt Pick Up Resistance (DPUR)Advanced Anti-Algal Formula
Finishes -Low Sheen

Surface preparation

Please ensure that surface to be coated is dry (moisture meter reading of <6%, clean and free from all loose extraneous materials such as loose paint, dust, etc. If fungus or algae is present, treat with Berger Fungicidal Wash. Apply a suitable sealer coat such as Berger Plastaseal or Berger Water Based Sealer prior to application of this product. For repainting over old coatings, remove all loose or flaking coatings and take them back to a firm edge. Ensure the remaining coating is tightly adherent.

Application procedure

Stir contents of the can thoroughly before use. Thinning is not usually required, however, if desired, do not exceed thinning ratio mentioned in the product data sheet. Apply two coats of paint with adeq

Tools you can use

Brush

May be used for difficult shapes or touch up purposes

Spray

Roller

May be used for difficult shapes or touch up purposes

Available Packs


20L

1 Coat
15.6 Sqm/L @ 25 microns**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Popular system

  • Base Coat
    Berger Water Based Sealer
  • Second Coat
    Weathercoat Silicone Emulsion

Other systems

  • Base Coat
    Berger Plastaseal
  • Second Coat
    Weathercoat Silicone Emulsion
  • Paint Doctor

  • Colour Guides

  • Make Your Plan

    Let us design a project plan

    to suit your needs.

Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!